Schedule Your Free Inspection

Complete the form below, and a member of our team will reach out shortly to coordinate your free inspection!

Suggestions appear as you type. Use the arrow keys to review them and Enter to select one. You must choose your address from the list.

Metal Roofing Installation & Repair in Cincinnati

4.9150+ Google reviews

Standing seam metal roofs can last 50+ years. Rooftop Relief installs standing seam on Cincinnati homes and corrugated metal on barns, garages and sheds, and repairs both, starting with a free inspection and a written estimate. We are fully licensed & insured, and financing options are available.

Google reviewsBBB 5 Star RatingAngi 5 Star RatingHomeAdvisor 5 Star RatingYelp 5 Star Rating
Roofers in safety harnesses installing standing seam metal panels over underlayment
Satisfied customers
760+
150+ Google reviews
4.9★
Calls answered
24/7

What's Included

What's Included in Our FREE Metal Roofing Estimate?

Metal is a long-term investment, so we walk you through panel types, colors and real numbers before you decide.

  1. Full roof measurement and deck check
  2. Standing seam vs. exposed fastener comparison
  3. Panel profile and color samples
  4. Ventilation and underlayment review
  5. Honest metal vs. asphalt recommendation
  6. Written, itemized estimate

The Basics

Is a Metal Roof Worth It in Cincinnati?

A metal roof is worth it if you plan to stay in your home for a long time. It costs more than asphalt shingles up front, but it lasts longer, needs less upkeep and handles hail, wind and snow well.

The metal roofs we install are steel panels with a baked-on paint finish, installed over a solid deck and underlayment. Snow and ice slide off instead of sitting on the roof, and lighter colors reflect summer sun, which helps keep the attic cooler.

Metal is not the right fit for every home. If you plan to sell in a few years, or the budget is tight, a new asphalt shingle roof usually makes more sense. Read our full comparison of asphalt shingles vs. metal roofing, or book a free roof inspection and we will give you an honest recommendation for your house.

Dark gray standing seam metal roof panels along the eave of a brick home

Metal Roof Repair

What Goes Wrong on a Metal Roof?

On a metal roof, problems usually start at the fasteners, trim and seals, not in the panels themselves.

Loose or Backed-Out Fasteners

On exposed fastener roofs, panels expand and contract with every hot day and cold night. Over time screws work loose and the rubber washers under them dry out and crack, which lets water in at each hole.

Leaks at Trim and Flashing

Most metal roof leaks start at the ridge cap, valleys, walls and chimneys, where trim pieces meet the panels, not in the middle of a panel.

Failed Sealant at Penetrations

Vent pipes, exhaust fans and skylights are sealed with boots and sealant that break down in the sun long before the metal does.

Hail Dents and Scratches

Large hail can dent panels. Deep scratches through the paint finish let rust start, mostly on older exposed fastener roofs.

Lifted Panels or Trim

Strong wind can catch an edge that was not fastened or clipped properly. A lifted piece of trim lets wind-driven rain get under the panels.

What We Install

Which Metal Roofs Do We Install?

We install standing seam metal roofs on homes and exposed fastener roofs on pole barns, garages and sheds, and we repair the metal roofs already on them.

Hidden fasteners

Standing Seam

Panels lock together at raised seams with the fasteners hidden underneath, so nothing is exposed to the weather. Our choice for homes, offices and other lived-in buildings, and it can last 50+ years. Learn more about standing seam metal roofs.

Corrugated and ribbed panels

Exposed Fastener

Panels screwed through the face. The lower-cost option we install on pole barns, garages and sheds. The exposed screws can loosen and need resealing over time. See how an exposed fastener roof works.

Existing metal roofs

Metal Roof Repair

Leaks, loose panels, worn fastener washers, failed sealant and damaged trim on the metal roof you already have.

What goes under and around the panels

  • Solid roof deck

    We check the deck for soft or rotted wood and replace it, so the panels have a flat, solid base.

  • Ice and water barrier

    A sticky membrane along the eaves and in valleys, where ice dams and heavy runoff push water uphill.

  • High-temperature underlayment

    A synthetic layer rated for the heat that builds up under metal panels. How underlayment works.

  • Eave, rake and valley trim

    Metal trim that closes every edge and sends water into the gutter, the same job a drip edge does on a shingle roof.

  • Wall and chimney flashing

    Bent metal flashing wherever the roof meets a wall or chimney, the spots where most leaks start.

  • Ridge cap and vented closures

    The ridge is closed with foam or vented closures, so the attic still breathes. What a ridge vent does.

Why we tear off first

We remove the old roof before any metal goes on. With the deck bare, we replace rotted sheathing, put down new underlayment and install new flashing, so the new panels sit on a solid, dry base.

Compare

Metal Roofing vs. Asphalt Shingles

Metal costs more on day one and less over the life of the house. Shingles cost less now and are easier to patch. Here is how they compare on a Cincinnati home.

Metal roofing compared with asphalt shingles
FeatureMetal roofingAsphalt shingles
Upfront costHigherLower
How long it lastsLonger, with fewer replacements over timeShorter, especially through hail and freeze-thaw
UpkeepCheck trim, sealant and fastenersReplace storm-damaged shingles as needed
Summer heatReflects more sunlight, especially lighter colorsAbsorbs more heat
LookClean lines, modern or farmhouseTraditional, dozens of colors
RepairsPanel or trim replacementEasy to patch a few shingles

Want a number for your own roof? Book a free metal roof estimate or ask about roof financing.

Why Rooftop Relief

Why Do Homeowners Trust Us With Their Metal Roof?

We Respond Within 2 Hours

Both offices are open 24/7. We are fully licensed & insured, with offices in Loveland and Cincinnati.

Financing Available

Spread the cost of a metal roof over time through Kemba Credit Union or Contractor Loan Pro. See financing options.

Our Process

How Does a Metal Roof Installation Work?

  1. 01

    FREE Inspection

    We measure the roof, check the deck and attic, and show you photos of what we found.

  2. 02

    Written Estimate

    Pick your panel type and color. Your estimate lists every part of the roof system, trim and flashing.

  3. 03

    Tear-Off and Deck Check

    We protect your landscaping, remove the old roof down to the deck and replace any soft or rotted sheathing.

  4. 04

    Panels and Trim

    Ice and water barrier, high-temperature underlayment, flashing, panels and trim go on as one system.

  5. 05

    Cleanup and Walkthrough

    A magnetic sweep for screws and nails, then we walk the finished roof with you.

Roofing Reviews From Real Cincinnati Homeowners

4.9from 150+ reviews on Google

“I had a good experience with Rooftop Relief. The team had great communication, showed up on time, and were respectful. They were able to find the source of the issue, which was thankfully a quick and easy fix. I will work with them again if any other roofing problems come up!”

Katherine Cary

“Rooftop Relief made replacing our roof an easy process. They stayed in constant communication as they walked us through every step of the replacement and even went above and beyond when faced with some curveballs during our project. We can't recommend them enough!”

Emily Hazelbaker

“I had a great experience with Rooftop Relief. The crew arrived on time and completed a thorough roof inspection before moving on to the roof repair and roof replacement. After a recent storm they handled the storm damage repair and emergency roof repair quickly and professionally. The new roof looks fantastic and the whole process was smooth, with clear communication and reliable service. I would recommend them to anyone looking for a trustworthy roofing contractor near me.”

Alison Blanton

“We couldn't be happier with RTR! The team was awesome to work with - professional, reliable, and detail-oriented. The crew completed the job in 1 day, cleaned up thoroughly, and the roof looks amazing! Fantastic job - highly recommend!”

Whitney

Roof repair for storm & wind damage · 4 months ago

“Couldn't have asked for a better experience! You hear the nightmares about projects like these - dealing with the insurance, coordinating all the inspections, etc. Well Jerry and his team handled ALL of that! They kept me informed at every step of the way, but all the real legwork was taken care of by them. The quality of the work was great, and the care taken to clean up the job site after it was done was very thoughtful. Can't recommend these guys enough!!”

C. Marlow

Roof repair for storm & wind damage · 4 months ago

“Superior communication, great attention to detail, Jerry and his crew will lookout for your interests!”

Lucia Faust

5 months ago

“Workmanship and customer service is outstanding. I hadn't filed a claim in 15 years and a lot has changed. RTR explained the insurance process upfront and the multiple steps that would happen with the insurance company from the initial denial to approval of the complete replacement of my siding. Great people, great company, great work.”

John Edwards

5 months ago

“With no doubt, Rooftop Relief Roofing Professionals company is the best! Jerry, Ryan, Josh, Bob, Paul and Brittany were over the top! They know their business and made a complicated situation very easy with no stress for us. They accomplished the impossible by working with our insurance company with awesome results! The roofing crew of eight worked together like a well-oiled machine. They were hard workers, professional, and respectful of our property! The job was done in one day!”

Karen

5 months ago

Free Estimate

Get Your Free Metal Roof Estimate

Tell us a bit about your roof and we'll be in touch to schedule your FREE inspection. No pressure, no obligation.

  • Fully Licensed & Insured
  • We respond within 2 hours, 24/7
  • Written, itemized estimates, no surprise fees
  • Call (513) 560-1181

Schedule Your
Free Inspection

Calls Answered 24/7

Suggestions appear as you type. Use the arrow keys to review them and Enter to select one. You must choose your address from the list.

FAQ

Metal Roofing FAQs

Answers to the questions Cincinnati homeowners ask us most about metal roofs.

How much does a metal roof cost in Cincinnati?

A metal roof costs more up front than an asphalt shingle roof. The price depends on the size and pitch of your roof, the panel type and how much trim and flashing the roofline needs. We measure the roof and give you a free, written, itemized estimate before you decide anything, and financing is available.

Standing seam or exposed fastener metal: what's the difference?

Standing seam panels lock together at raised seams and the fasteners are hidden under the panel, so nothing is left exposed to the weather. Exposed fastener panels are screwed through the face of the panel. They cost less, but the rubber washers on those screws age and need to be checked and replaced over the years.

Will a metal roof be loud when it rains?

Not on a home. A residential metal roof goes over a solid roof deck and underlayment, which deadens the sound of rain. The loud metal roofs people remember are usually on barns and sheds, where the panels sit on open framing with nothing underneath.

Can a metal roof go over my existing shingles?

We remove the old roof first. A full tear-off lets us replace any rotted sheathing, put down new underlayment and install new flashing, so the metal goes on a solid, dry base instead of hiding problems underneath.

Do you repair existing metal roofs?

Yes. We fix leaks at trim and flashing, replace worn fastener washers, reseal penetrations and replace damaged panels. If a repair will solve the problem, we will tell you instead of quoting a new roof.

Still have a question?

Call and talk it through with our team. No pressure, no obligation.

Roofing terms explained

  • Underlayment

    Underlayment is the water-resistant layer between the deck and the shingles.

  • Roof Flashing

    Roof flashing is thin metal, sometimes rubber, installed wherever a roof meets something else: a chimney, a wall, a vent, a valley.

  • Ridge Vent

    A ridge vent is the exhaust vent along the peak of the roof.

See all roofing terms

Explore More

Asphalt Shingle Roofing

Asphalt Shingle Roofing

Owens Corning shingle roofs, installed and repaired

Roof Replacement

Roof Replacement

Full roof replacement with Owens Corning roofing systems

Flat Roof / TPO / Rubber

Flat Roof / TPO / Rubber

TPO, EPDM rubber and flat roof repairs

Commercial Roofing

Commercial Roofing

Low-slope roofing for businesses and churches

Call Now